Publications de l'équipe Thermométrie

2016

Publications avec comité éditorial

R. M. Gavioso, D. Madonna Ripa, P. P. M. Steur, C. Gaiser, T. Zandt, B. Fellmuth, M. de Podesta, R. Underwood, G. Sutton, L. Pitre, F. Sparasci, L. Risegari, L. Gianfrani, A. Castrillo, G. Machin, " Progress towards the determination of thermodynamic temperature with ultra-low uncertainty”, Phil. Trans. R. Soc. A 374: 20150046. http://dx.doi.org/10.1098/rsta.2015.0046

B. Gao, L. Pitre, E.C. Luo, M.D. Plimmer, P. Lin, J.T. Zhang, X.J. Feng, Y.Y. Chen, F. Sparasci, “Feasibility of primary thermometry using refractive index measurements at a single pressure”, soumis au journal “Measurement” en Octobre 2016.

B. Fellmuth, E. Mendez-Lango, T. Nakano, F. Sparasci, “Guide to the realization of the ITS-90 – Cryogenic fixed points”, en attente de publication sur le site du BIPM.

G. Machin, K. Anhalt, M. Battuello, F. Bourson, P. Dekker, A. Diril, F. Edler, C.J. Elliott, F. Girard, A. Greenen, L. Knazovická, D. Lowe, P. Pavlásek, J.V. Pearce, M. Sadli, R. Strnad, M. Seifert, E.M. Vuelban “The European project on high temperature measurement solutions in industry (HiTeMS) - A summary of achievements” Measurement, vol 78, p168-179 (2016).

Woolliams E et al. “Thermodynamic temperature assignment to the point of inflection of the melting curve of high temperature fixed points” Phil. Trans. R. Soc. A 374 20150044 (2016).

Sadli M et al. “Dissemination of thermodynamic temperature above the freezing point of silver” Phil. Trans. R. Soc. A 374 20150043 (2016).

S.G.R. Salim, S. Briaudeau, F. Bourson, B. Rougié, D. Truong, O. Kozlova, J.-M. Coutin, M. Sadli “A reference radiance-meter system for thermodynamic temperature measurements” Metrologia 53 (2016) 945–955 doi:10.1088/0026-1394/53/3/945.

O. Kozlova, A. Sadouni, D. Truong, S. Briaudeau, M. Himbert, “Tunable transportable spectroradiometer based on an acousto-optical tunable filter: Development and optical performance”, Review of Scientific Instruments 87 (12), 125101 (2016).

G. Machin, J. Engert, R.M. Gavioso, M. Sadli, E. Woolliams “Summary of achievements of the European Metrology Research Programme Project ‘‘Implementing the new Kelvin” (InK 1)” Measurement 94 (2016) 149–156.

Communications

M. L. Pitre “Determinations of the Boltzmann constant k” CCU, BIPM, Paris, 14/6/2016

L. Pitre, F. Sparasci, L. Risegari, C. Guianvarc’h, M.D. Plimmer, “Determination of the Boltzmann constant k using a 3 litre copper quasi-sphere” Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pl)

L. Pitre, F. Sparasci, L. Risegari, C. Guianvarc’h, M.D. Plimmer “ACOUSTIC THERMOMETRY WITH A 3 LITER COPPER QUASI-SPHERE FROM 220 K TO 303 K AT LNE- CNAM ” Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

NICOLA CHIODO, Andrea Cappella, Laurent Pitre, Fernando Sparasci, Lara Risegari, Mark D. Plimmer and Eric Georgin “DIFFERENTIAL MICROWAVES HYGROMETER FOR MOISTURE MEASUREMENTS ON A WIDE WATER VAPOR CONCENTRATION RANGE” Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

F. Sparasci, L. Pitre, A. Vergé, B. Buée, A. El Matarawy, “An improved calorimeter for SPRTs and CSPRTs at the mercury triple point”, Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

F. Sparasci, L. Pitre, A. Vergé, B. Buée, A. Kowal, B. Kołodziej, “The triple points of Xe, C2F6 and SF6: preliminary realization at LNE-Cnam”, Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

F. Sparasci, L. Pitre, M. Le Menn, D. Malardé, “A calibration facility for an absolute salinometer based on the index of refraction of seawater”, Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

C. Cappella, F. Sparasci, L. Pitre, B. Buée, “Calibration of capsule SPRTs at the triple point of water in copper sealed cells”, Tempmeko2016 26/06/2016- 01/07/2016 Zakopane (Pologne)

N. Chiodo, A. Cappella, L. Pitre, F. Sparasci, M. Lours, L. Risegari, M. Plimmer, E. Georgin, "Differential microwaves hygrometer for moisture measurements on a wide water vapor concentration range”, MMC-2016, 26-29/09/2016, Madrid (Espagne)

F. Sparasci, L. Pitre, B. Buée, N. Chiodo, "Metrology of thermodynamic quantities for atmospheric and oceanic research”, ENVRIPlus Meeting, MMC-2016, 26-29/09/2016, Madrid (Espagne)

F. Sparasci, L. Pitre, M. Le Menn, D. Malardé, “ Progress building a calibration facility for an absolute salinometer based on the index of refraction of seawater", MMC-2016, 26-29/09/2016, Madrid (Espagne)

F. Sparasci, L. Pitre, B. Buée, N. Chiodo, " Temperature and salinity measurements in oceans: towards the improvement of long-term traceability”, JPI Oceans Workshop, 13/10/2016, Brest

S. Briaudeau, O. Kozlova, A. Sadouni, D. Truong, F. Bourson, S.G.R. Salim and M. Sadli, “Metrological validation of a new tuneable visible radiation thermometer“ presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

O. Kozlova, S. Briaudeau, D. Truong, V. Vidal, A. Sadouni, F. Bourson and M. Sadli, “Portable and wavelength tuneable near infrared radiation thermometer“, presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

M. J. Martin, F. Bourson, C. García-Izquierdo, M. Sadli “A Comparison of the Melting Temperatures of Two High-Temperature Fixed Point Cells between LNE-Cnam and CEM” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

P Saunders, E R Woolliams, H W Yoon, A D W Todd, M Sadli, S Briaudeau, E W M van der Ham, K Anhalt, L Werner, D R Taubert, B Khlevnoy “Uncertainty Estimation In Primary Radiometric Temperature Measurement” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

Y. Yamada, M. Battuello, F. Girard, M. Sadli, F. Bourson, D. Lowe, T. Wang, W. Dong, E. Woolliams , G. Machin “Stability of High-Temperature Fixed Point Cells During Thermodynamic Temperature Determination” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

Graham Machin, Jost Engert, Roberto Gavioso, Mohamed Sadli, Emma Woolliams “Summary of Achievements of The EMRP Project Implementing the New Kelvin (InK)” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

F. Bourson, M. Sadli, S. Briaudeau, O. Kozlova and B. Rougié “A Review of the Development of HTFP Cells at LNE-Cnam over the last 15 Years” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

M. Sadli, F. Bourson, S. Briaudeau, S.G.R. Salim, O. Kozlova, D. Truong, A. Sadouni and B. Rougié “Determination of T-T90 on a Set Of High-Temperature Fixed Points at LNE-Cnam” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

S. Briaudeau, F. Bourson, S.G.R. Salim, , O. Kozlova, D. Truong, A. Sadouni, B. Rougié, M. Sadli “Measurement of the Thermodynamic Melting Temperatures of High-Temperature Fixed Points at LNE-Cnam” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

H C McEvoy, G Machin, D Lowe, A Whittam, M Sadli, F Bourson, L Xiaofeng, M J Martin, C E Gibson, H W Yoon, V B Khromchenko, A Todd, D Woods, Y Yamada, Y Yamaguchi, M S Matveyev, D Taubert, K Anhalt, YS Yoo “Update on Progress with The Radiation Thermometry Key Comparison CCT-K10” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

M. Sadli, B. Khlevnoy, F. Bourson, I. Grigoryeva, S. Briaudeau, O. Kozlova, V. Gavrilov, D. Otryaskin and B. Rougié “Comparison and Melting Temperature Determination of WC-C Cells Developed at VNIIOFI and LNE-Cnam” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

J.-R. Filtz, B. Hay, N. Arifovic, M. Sadli, G. Failleau, D. Mac Lochlainn, A. Blahut, J. Bojkovski6, J. Drnovsek, N. Hodzic, L. Knazovicka, N. Milosevic, S. Simic, D. Sestan, R. Strnad, E.Thurzo-Andras, D. Zvizdic “Strenghening the European Traceability and Dissemination in Thermal Metrology” presented at the 13th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2016, 26 June – 1st July, Zakopane, Poland

M. Sadli “Métrologie des hautes températures dans le contexte du programme européen de recherche et d’innovation : premiers résultats et perspectives” 6ème Conférence Internationale de Métrologie du 21 au 24 mars 2016, Dakar, Sénégal.

M. Sadli, F. Bourson, G. Failleau, T. Deuzé, C. Journeau, C. Parga, D. Lowe, A. Diril "Nouvelles références pour la traçabilité in-situ des mesures à haute température jusqu’à 2500 °C" Séminaire « Matériaux et Fluides à Haute Température » du "Groupe Hautes Températures" de la Société Française de Thermique 20 septembre 2016, Paris

2015

Publications avec comité éditorial

L. Pitre, L. Risegari, F. Sparasci, M. D. Plimmer, M. E. Himbert, P. A. Giuliano Albo, “Determination of the Boltzmann constant k from the speed of sound in helium gas at the triple point of water”, Metrologia 52 (2015) S263–S273, doi:10.1088/0026-1394/52/5/S263

F. Sparasci, D. Jouin, T. Deuzé, J. Bordereau, G. Coeur-Joly, D. Sourgen, A. Hertzog, “Submillimetre thermistors for balloon-borne applications up to lower stratosphere: preliminary characterization with 0.02K uncertainty”, Meteorol. Appl. (2015), doi:10.1002/met.1504

C. Cappella, F. Sparasci, L. Pitre, B. Buée, A. El Matarawy, “Improvements in the realization of the triple point of water in metallic sealed cells at LNE-Cnam”, Int. J. Metrol. Qual. Eng. Volume 6, Number 4, 2015, doi:10.1051/ijmqe/2015026

P. P. M. Steur, F. Pavese, B. Fellmuth, Y. Hermier, K. D. Hill, J. Seog Kim, L. Lipinski, K. Nagao, T. Nakano, A. Peruzzi, F. Sparasci, A. Szmyrka-Grzebyk, O. Tamura, W. L Tew, S. Valkiers, J. van Geel, “Isotopic effects in the neon fixed point: uncertainty of the calibration data correction”, 2015 Metrologia 52 104, doi:10.1088/0026-1394/52/1/104

I.Yang, L.Pitre, M.R Moldover, J.Zhang, X.Feng and K.Jin Seog “Improving acoustic determinations of the Boltzmann constant with mass spectrometer measurements of the molar mass of argon” Metrologia (2015) 52: 394–403.

R. M. Gavioso, D. Madonna Ripa, P. P. M. Steur, C. Gaiser, T. Zandt, B. Fellmuth, M. de Podesta, R. Underwood, G. Sutton, L. Pitre, F. Sparasci, L. Risegari, L. Gianfrani, A. Castrillo, G. Machin, “Progress towards the determination of the thermodynamic temperature with ultra-low uncertainty”, Phil. Trans. R. Soc. A 20150046. doi:10.1098/rsta.2015.0046

O. Kozlova, S.Briaudeau, L. Rongione, F. Bourson, S. Guimier, S. Kosmalski et M. Sadli “Caractérisation d’un corps noir de transfert pour l’étalonnage de pyrometers jusqu’à 3 000 ◦C” REVUE FRANÇAISE DE MÉTROLOGIE no 36, Volume 2014-4 pp29-37 (2015).

S. Mejri, P. L. T. Sow, O. Kozlova, C. Ayari, S. Tokunaga, C. Chardonnet, S. Briaudeau, B. Darquié, F. Rohart, C. Daussy, "Measuring the Boltzmann constant by mid-infrared laser spectroscopy of ammonia", Metrologia 06/2015; 52(5): S314–S323, (2015)

F. Edler, S. Haupt, S.-A. Mokdad, G. Failleau, and M. Sadli “Investigation of self-validating thermocouples with integrated fixed-point units” Int. J. Metrol. Qual. Eng. 6, 103 (2015).

D. Lowe, G. Machin, M. Sadli “Correction of temperature errors due to the unknown effect of window transmission on ratio pyrometers using an in situ calibration standard” in Measurement 68 (2015) 16–21.

Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, A. Todd, T. Wang “Evaluation and Selection of High-Temperature Fixed-Point Cells for Thermodynamic Temperature Assignment” Int J Thermophys, Volume 36, Issue 8, pp 1834-1847 (2015) DOI 10.1007/s10765-015-1860-0

O. Kozlova, S. Briaudeau, L. Rongione, F. Bourson, S. Guimier, S. Kosmalski, M. Sadli “Calibration of Radiation Thermometers up to 3000 ◦C: Effective Emissivity of the Source” Int J Thermophys Volume 36, Issue 8, pp 1726-1742 (2015) DOI 10.1007/s10765-015-1867-6.

A. Diril, F. Bourson, C. Parga, M. Sadli “Construction and Characterization of Mini-ruthenium–Carbon Eutectic Cells for Industrial Use” Int J Thermophys, 36:3355–3365, (2015) DOI 10.1007/s10765-015-1971-7

F. Bourson, M. Sadli, T. Deuzé, S. Briaudeau, B. Rougié “Etude des points fixes du Cr-C aux transitions eutectique et péritectique”, REVUE FRANCAISE DE METROLOGIE vol. 2015-3 n°39, pp 35-42 (2015).

G. Machin, K. Anhalt, M. Battuello, F. Bourson, P. Dekker, A. Diril, F. Edler, C.J. Elliott, F. Girard, A. Greenen, L. Knazovická, D. Lowe, P. Pavlásek, J.V. Pearce, M. Sadli, R. Strnad, M. Seifert, E.M. Vuelban “The European project on high temperature measurement solutions in industry (HiTeMS) - A summary of achievements” Measurement - accepted.

Woolliams, E., Anhalt, K., Ballico, M., Bloembergen, P., Bourson, F., Briaudeau, S., Campos, J., Cox, M. G., del Campo, D., Dury, M.R., Gavrilov, V., Grigoryeva, I., Hernandez, M.L., Jahan, F., Khlevnoy, B., Khromchenko, V., Lowe, D.H., Lu, X., Machin, G., Mantilla, J.M., Martin, M.J., McEvoy, H.C., Rougié, B., Sadli, M., Salim, S.G., Sasajima, N., Taubert, D.R., Todd, A., Van den Bossche, R., van der Ham, E., Wang, T., Wei, D., Whittam, A., Wilthan, B., Woods, D., Woodward, J., Yamada, Y., Yamaguchi, Y., Yoon, H., Yuan, Z., “Thermodynamic temperature assignment to the point of inflection of the melting curve of high temperature fixed points”, Phil. Trans R. Soc. A. Accepted

M. Sadli, G. Machin, K. Anhalt, F. Bourson, S. Briaudeau, D. del Campo, A. Diril, O. Kozlova, D.H. Lowe, J. M. Mantilla Amor, M. J. Martin, H. McEvoy, M. Ojanen-Saloranta, Ö. Pehlivan, B. Rougié, S. G. R. Salim « Dissemination of thermodynamic temperature above the freezing point of silver » Phil. Trans R. Soc. A. Accepted

Y. Hermier et al. « Etalons métrologiques fondamentaux », Techniques de l’ingénieur, r50-v2,2015.

Communications

M. Laurie, M. Sadli, G. Failleau, L .Vlahovic, M. Fuetterer, J-M. Lapetite, S. Fourrez and V. V. Rondinella “New fixed-point mini-cell to investigate thermocouple drift in a high-temperature environment under neutron irradiation” presented at ANIMMA 2015 in Lisbon, 20th-24th April 2015.

O. Kozlova, L. Rongione, S. Briaudeau “Estimation des erreurs d’étalonnage de thermometres infrarouges industriels liés à la méconnaissance de l’émissivité de sources et des bandes spectrales de thermomètres infrarouges” 17ème Congrès de Métrologie CIM2015, Paris 21-24 Septembre 2015.

M. Sadli, K. Anhalt, F.Bourson, S. Briaudeau, D. del Campo, A. Diril, O. Kozlova, D. Lowe, G. Machin, J. M. Mantilla Amor, M. Martin, H. Mc Evoy, M. Ojanen, Ö. Pehlivan, B. Rougié, S.G. R. Salim “Experimental assessment of thermodynamic temperature dissemination methods at the highest temperatures” 17ème Congrès de Métrologie CIM2015, Paris 21-24 Septembre 2015.

J.R.Filtz, B. Hay, N. Arifovic, M.Sadli, G. Failleau, D. Mc Lochlainn, A. Blahut, J. Bojkovsky, J. Drnovsek , N. Hodzic, L. Knazovicka, N. Milosevic, S. Simic, D. Sestan, R. Strnad, E. Thurzo-andras, D. Zvizdic “Development of new traceable European capabilities in thermal metrology” 17ème Congrès de Métrologie CIM2015, Paris 21-24 Septembre 2015.

M. Sadli “Is it possible to improve temperature measurement in the nuclear industry?” Workshop “In-pile thermal measurements” à ANIMMA 2015, 20th April 2015.

G. Machin, J. Engert; R. Gavioso, M. Sadli, E. Woolliams “The Euramet Metrology Research Programme Project: Implementing the new kelvin (InK)” Tempertaure-2015, 5-th All-Russian and Countries-Participants of COOMET Conference on Thermometry Problems, VNIIM 21-24 April 2015 Saint-Petersbourg, Russian Federation (oral).

M. Sadli, G. Machin, K. Anhalt, F. Bourson, S. Briaudeau, D. del Campo, A. Diril, O. Kozlova, D.Lowe, J. M. Mantilla Amor, M. Martin, H. Mc Evoy, M. Ojanen, Ö. Pehlivan, B. Rougié, S. G. R. Salim “Dissemination of thermodynamic temperature above the silver freezing point temperature” Présentation orale au workshop Theo Murphy "Towards implementing the new kelvin" Kavli Royal Society Centre, Chicheley Hall, 18-19 Mai 2015 (https://royalsociety.org/events/2015/05/new-kelvin/) .

F. Bourson, S. Briaudeau, S. G. R. Salim, B. Rougie, D. Truong, O. Kozlova, M. Sadli “Radiometric temperature measurements on high-temperature fixed points at LNE-Cnam” Présentation poster au workshop "Towards implementing the new kelvin" Kavli Royal Society Centre, Chicheley Hall, 18-19 Mai 2015 (https://royalsociety.org/events/2015/05/new-kelvin/).

G. Machin, R. Strnad, F. Edler, M. Sadli, K. Anhalt, M. Seifert, J. Pearce “The research outcomes of the European Metrology Research Programme Project: HiTeMS – High Temperature Measurement Solutions for Industry” 17ème Congrès de Métrologie CIM2015, Paris 21-24 Septembre 2015 (oral).

O. Kozlova et al. “Estimation des erreurs d’étalonnage de thermometers infrarouges industriels liés à la méconnaissance de l’émissivité de sources et des bandes spectrales de thermomètres infrarouges” 17ème Congrès de Métrologie CIM2015, Paris 21-24 Septembre 2015 (poster).

M. Sadli “Réalisation et dissémination de la température thermodynamique au-dessus de 1000°C : Résultats du JRP « Implementing the new K” Séminaire RetD LNE, Trappes, 17/12/2015.

Thèse

Achour Sadouni «Réalisation et caractérisation métrologique d’un pyromètre accordable », 11 décembre 2015, au CNAM, Saint-Denis.

2014

Publications avec comité éditorial

M. Laurie, S. Fourrez, M.A. Fütterer, J.M. Lapetite, M. Sadli, R. Morice, G. Failleau “Long term out-of-pile thermocouple tests in conditionsrepresentative for nuclear gas-cooled high temperature reactors” Nuclear Engineering and Design 271 (2014) 283–290.

F. Bourson, M. Sadli, B. Rougié, S. Briaudeau, O. Kozlova “Influence of the Opening of a Blackbody Cavity Measured at the Ag and Cu ITS-90 Fixed Points” Int J Thermophys (2014) 35:516–525

H. C. McEvoy, M. J. Martin, A. Steiner, E. Schreiber, F. Girard, M. Battuello, M. Sadli, P. Ridoux, B. Gutschwager, J. Hollandt, A. Diril, Ö. Pehlivan “EURAMET Project to Examine Underlying Parameters in Radiance Temperature Scale Realization, 156 °C to 1000 °C” Int J Thermophys (2014) 35:446–466.

C. J. Elliott, G. Failleau, T. Deuzé, M. Sadli, J. V. Pearce, G. Machin “Long-Term Monitoring of Thermocouple Stability with Miniature Fixed-Point Cells” Int J Thermophys (2014) 35:560–573.

G. Failleau, T. Deuzé, D. Jouin, S. Mokdad, S. Briaudeau, M. Sadli “A New Co–C Eutectic Fixed-Point Cell for Thermocouple Calibration at 1324 ◦C” Int J Thermophys (2014) 35:1190–1201.

G. Failleau, C. J. Elliott, T. Deuzé, J. V. Pearce, G. Machin, M. Sadli “Miniature Fixed-Point Cell Approaches for In Situ Monitoring of Thermocouple Stability” Int J Thermophys (2014) 35:1223–1238

G. Machin, J. Engert, R. M. Gavioso, M. Sadli, E. R.Woolliams “The Euramet Metrology Research Programme Project Implementing the New Kelvin (InK)” Int J Thermophys (2014) 35:405–416.

J. V. Pearce, C. J. Elliott, D. H. Lowe, G. Failleau, T. Deuzé, F. Bourson, M. Sadli, G. Machin  “Performance of Pt–C, Cr7C3–Cr3C2, Cr3C2–C, and Ru–C Fixed Points for Thermocouple Calibrations Above 1600 ◦C” Int J Thermophys (2014) 35:547–559.

M. Sadli, F. Bourson, A. Diril, C. Journeau, D. Lowe and C. Parga “Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications” EPJ Web of Conferences 77, 00018 (2014).

L. Johansson, J.-R. Filtz, P. DeFelice, M. Sadli, A. Plompen, J. Heyse, B. Hay, A. Dinsdale, S. Pommé, P. Cassette, J. Keightley “Metrology for New Generation Nuclear Power Plants – MetroFission” IEEE Transactions on Nuclear Science 08/2014; 61(4):2017-2023.

M R Moldover, R M Gavioso, J B Mehl, L Pitre, M de Podesta and J T Zhang « Acoustic gas thermometry », Metrologia 51 (2014) R1–R19.

O. Kozlova, S. Briaudeau, L. Rongione, F. Bourson, S. Guimier, S. Kosmalski, M. Sadli, « Caractérisation d’un corps noir de transfert pour l’étalonnage de pyromètres jusqu’à 3 000 °C », Revue française de métrologie N36, Vol. 2014-4, 29-37.

Communications

M. Sadli “Self-validation techniques and path transmission corrections for radiation thermometry >2000 °C” Workshop on industrial high temperature measurement solutions 15 Mai 2014 Cnam Saint-Denis.

M. Sadli “Mesure précise de la température : de la redéfinition de l’unité à l’utilisateur" Conférence invitée au séminaire de la filière « Instrumentation » de l’université Aix-Marseille, 14 mars 2014.

M. Sadli “Traçabilité et incertitudes à haute temperature” 2ème reunion du Groupe de Travail “Analyse thermique à haute temperature” du Groupement de Recherche  Thermodynamique des Matériaux à Haute Température (GDR TherMatHT) – 3 décembre 2014 au CEA - Paris 15.

A. Sadouni, O. Kozlova, D. Truong, F. Bourson M. Sadli, and S. Briaudeau “Performances of the innovative portable spectroradiometer: rapid wide-range tunability and high reproducibility”, Poster presentation, NEWRAD 2014 Conference 24 - 27 June 2014

2013

Publications avec comité éditorial

M R Moldover, R M Gavioso, J B Mehl, L Pitre, M de Podesta and J T Zhang « Acoustic gas thermometry », Metrologia 51 (2014) R1–R19.

J. Fischer, B. Fellmuth, C. Gaiser, T. Zandt, L. Pitre, S. Briaudeau, F. Sparasci, D. Truong, Y. Hermier, R. M. Gavioso, C. Guianvarc'h, P. A. Giuliano Albo, A. Merlone, F. Moro, M. de Podesta, G. Sutton, R. Underwood, G. Machin, D. del Campo, J. Segovia Puras, D. Vega-Maza, J. Petersen, J. Hald, L. Nielsen, S. Valkiers, B. Darquié, C. Bordé, C. Chardonnet, C. Daussy, L. Gianfrani, A. Castrillo, P. Laporta, G. Galzerano, “The IMERAPlus joint research project for determinations of the Boltzmann constant”, AIP Conference Proceedings 1552, 1 (2013); doi: 10.1063/1.4821367

F. Pavese, P. P. M. Steur, Y. Hermier, K. D. Hill, J. S. Kim, L. Lipiski, K. Nagao, T. Nakano, A. Peruzzi, F. Sparasci, A. Szmyrka-Grzebyk, O. Tamura, W. L. Tew, S. Valkiers, J. van Geel, “Dependence of the triple point temperature of neon on isotopic composition and its implications for the ITS-90”, AIP Conference Proceedings 1552, 192 (2013); doi: 10.1063/1.4821378

A. Merlone, G. Lopardo, I. Antonsen, S. Bell, R. Benyon, N. Boese, D. del Campo, M. Dobre, J. Drnovšek, A. Elkatmis, E. Georgin, E. Grudniewicz, M. Heinonen, C. Holstein-Rathlou, J. Johansson, P. Klason, R. Knorova, C. Melvad, J. Merrison, K. Migaa, M. de Podesta, H. Saathoff, D. Smorgon, F. Sparasci, R. Strnad, A. Szmyrka-Grzebyk, E. Vuillermoz, “A new challenge for meteorological measurements: The "MeteoMet" project - Metrology for meteorology”, AIP Conference Proceedings 1552, 1030 (2013); doi: 10.1063/1.4821419

I. Didi-Alaoui, D. Fiorillo, A. Vergé, F. Sparasci, D. Jouin, Y. Hermier, “Design and implementation of a dedicated calorimeter for long stem SPRTs calibrations at the argon and oxygen triple points”, AIP Conference Proceedings 1552, 474 (2013); doi: 10.1063/1.4819587

F. Sparasci, I. Didialaoui, A. Vergé, Y. Hermier, “A new calorimeter for the simultaneous calibration of SPRTs and CSPRTs at the triple point of mercury”, AIP Conference Proceedings 1552, 486 (2013); doi: 10.1063/1.4819589

H. C. McEvoy, M Sadli, F Bourson, S Briaudeau and B Rougié “A comparison of the NPL and LNE-Cnam silver and copper fixed-point blackbody sources, and measurement of the silver/copper temperature interval” Metrologia vol 50, n° 6, p 559 (2013) http://dx.doi.org/doi:10.1088/0026-1394/50/6/559

M. G. Ahmed, K. Ali, F. Bourson et M. Sadli “Comparison of the copper blackbody fixed-point cavities between NIS and LNE-Cnam Meas. Sci. Technol. 24 (2013) http://dx.doi.org/doi:10.1088/0957-0233/24/9/095902

M. Sadli, D. del Campo, M. de Podesta, T. Deuzé, G. Failleau, C. J. Elliott, S. Fourrez, C. García et J. V. Pearce “MetroFission: New High-Temperature References and Sensors for the Nuclear Industry” AIP Conf. Proc. 1552, 1003 (2013) http://dx.doi.org/10.1063/1.4821417

Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, et T. Wang “Construction of high-temperature fixed-point cells for thermodynamic temperature assignment” AIP Conf. Proc. 1552, 335 (2013) http://dx.doi.org/doi:10.1063/1.4821385

G. Failleau, T. Deuzé, F. Bourson, S. Briaudeau and M. Sadli “A New Technique for Direct Traceability of Contact Thermometry Co-C Eutectic Cells to the ITS-90” AIP Conf. Proc. 1552, 352 (2013) http://dx.doi.org/10.1063/1.4819565

G. Machin, K. Anhalt, F. Edler, J. V. Pearce, M. Sadli, R. Strnad and E. M. Vuelban “HiTeMS: A Project to Solve High Temperature Measurement Problems in Industry” AIP Conf. Proc. 1552, 958 (2013) http://dx.doi.org/10.1063/1.4821414

O. Kozlova, J.-M. Danet, S. Guerandel et E. de Clercq “Horloge à cellule de césium et piégeage cohérent de population : étude des principaux effets affectant la stabilité de la fréquence” Revue Française de Métrologie no 32, Volume 2012-4, pp 3-14 http://lc.cx/cJo

F. Bourson, S. Briaudeau, B. Rougié, and M. Sadli “Determination of the furnace effect of two high-temperature furnaces on metal-carbon eutectic points” AIP Conf. Proc. 1552, 380 (2013) http://dx.doi.org/10.1063/1.4821389

G. Machin, K. Anhalt, P. Bloembergen, M. Sadli, Y. Yamada et E. R. Woolliams “Progress Report for the CCT-WG5 High Temperature Fixed Point Research Plan” AIP Conf. Proc. 1552, 317 (2013) http://dx.doi.org/10.1063/1.4821384

Communications

L. Pitre, F. Sparasci, L. Risegari, D. Truong, “ ACOUSTIC THERMOMETRY: NEW RESULTS FROM 77 K TO 303 K AT LNE- CNAM” (151), Tempmeko 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

R. M. Gavioso, D. Madonna Ripa , P. Tarizzo 1, A. Merlone , L. Pitre , D. Truong “ACOUSTIC DETERMINATIONS OF THERMODYNAMIC TEMPERATURE BETWEEN THE MERCURY AND INDIUM FIXED POINTS” (286), Tempmeko 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

F. Sparasci, L. Pitre, B. Buée , A. Cappella , E. Georgin “A NEW GENERATION OF HYGROMETERS BASED ON MICROWAVE RESONANT CAVITIES: DESIGN AND PRELIMINARY TESTS” (273), Tempmeko 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

L. Pitre, F. Sparasci, L. Risegari, D. Truong “ TWO MEASUREMENTS OF THE BOLTZMANN CONSTANT KB USING A QUASI-SPHERICAL ACOUSTIC RESONATOR” (152), Tempmeko 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

L. Risegari, L. Pitre, F. Sparasci, D. Truong, A. Vergé, B. Buée “ACOUSTIC GAS THERMOMETER BELOW 4K: FIRST TESTS” (379), Tempmeko 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

D. Lowe, F. Bourson, C. Journeau, G. Machin, C. Parga et M. Sadli “Correction for window transmission losses in radiation thermometry using high temperature fixed points” 16ème Congrès International de Métrologie, Octobre 2013 Paris – article : http://dx.doi.org/10.1051/metrology/201315003

G. Failleau, T. Deuzé, M. Sadli, S. Mokdad et S. Briaudeau “Méthodes d’Auto-Validation Pour Thermocouples à Haute Température” 16ème Congrès International de Métrologie, Octobre 2013 Paris – article : http://dx.doi.org/10.1051/metrology/201315002

M. Sadli, F. Bourson, S. Briaudeau, J.-M. Coutin, T. Deuzé, G. Failleau, S. Guimier, S. Kosmalski, O. Kozlova, C. Martin, S. Mokdad, L. Rongione, B. Rougié, A. Sadouni, D. Truong, V. Vidal et Y. Hermier “Amélioration des références et dissémination dans le domaine des hautes températures et de la pyrométrie optique au LNE-Cnam” 16ème Congrès International de Métrologie, Octobre 2013 Paris – article : http://dx.doi.org/10.1051/metrology/201315009

G. Machin, K. Anhalt, F. Edler, J. Pearce, M. Sadli, R. Strnad and E. Vuelban “Progress report for EMRP project “High Temperature Metrology for Industrial Applications”; HiTeMS” 16ème Congrès International de Métrologie, Octobre 2013 Paris – article : http://dx.doi.org/10.1051/metrology/201315001

M. Sadli, F. Bourson, A. Diril, C. Journeau, D. Lowe et C. Parga “Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications” 16ème Congrès International de Métrologie, Octobre 2013 Paris – article en cours d’évaluation et à paraître sur Web of Conferences (accès libre).

C. Parga, F. Bourson, M. Sadli, C. Journeau “Cellules à points fixes de température pour la recherche appliqué” Congrès Français de Thermique, Gérardmer 28-31 mai 2013 – article : http://lc.cx/qCr

M. Sadli, M. de Podesta, D. del Campo, T. Deuzé, G. Edwards, C. J. Elliott, G. Failleau, S. Fourrez, C. Garcia Izquierdo, M. Laurie, S. A. Mokdad, J. V. Pearce, G. Sutton “New Temperature References and Sensors for the Next Generation of Nuclear Power Plants” in Proceedings of the 3rd International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications, ANIMMA 2013, paper 1092 (2013).

L Johansson, J.-R. Filtz, P. DeFelice, M. Sadli, A. Plompen, J. Heyse, B. Hay, A. Dinsdale, S. Pommé, P. Cassette, J. Keightley “Metrology for New Generation Nuclear Power Plants – MetroFission” in Proceedings of the 3rd International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications, ANIMMA 2013, paper 1099 (2013).

M. Sadli, T. Bellin-Croyat, F. Bourson, T. Deuzé, A. Diril, G. Failleau, C. Journeau, D. Lowe, S.A. Mokdad, M. Monteiro, C. Parga, N. Richard "High-temperature fixed points for in-situ industrial applications” Workshop HiTeMS, Congrès International de Métrologie, Paris 9 Octobre 2013.

G. Failleau, F. Edler, “HiTeMS WP3: Self-validating contact thermometry sensors for above 2000 °C” Workshop HiTeMS, Congrès International de Métrologie, Paris 9 Octobre 2013.

G. Machin, J. Engert, R. Gavioso, M. Sadli, E. Woolliams “THE EURAMET METROLOGY RESEARCH PROGRAMME PROJECT: IMPLEMENTING THE NEW KELVIN (INK)” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

F. Bourson, M. Sadli, S. Briaudeau, B. Rougié and O. Kozlova “INFLUENCE OF THE OPENING OF A BLACKBODY CAVITY MEASURED AT THE AG AND CU ITS-90 FIXED POINTS” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

G. Failleau, C.J. Elliott, T. Deuzé, J.V. Pearce, G. Machin and M. Sadli ”MINIATURE FIXED-POINT CELL APPROACHES FOR IN-SITU MONITORING OF THERMOCOUPLE STABILITY” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

G. Failleau, N. Arifoviç, T. Deuzé, A. Diril, S. Duris, M. Langley, J.V. Pearce, M. Sadli and R. Strnad “INVESTIGATION OF THE DRIFT OF A BATCH OF BASE METAL THERMOCOUPLES AT HIGH TEMPERATURE” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

G. Failleau, T. Deuzé, D. Jouin, S. Mokdad, S. Briaudeau and M. Sadli “A NEW CO-C EUTECTIC FIXED-POINT CELL DESIGN FOR EXTENDING THE CALIBRATION CAPACITIES” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

H. C. McEvoy, M. J. Martin, A. Steiner, E. Schreiber, F. Girard, M. Battuello, M. Sadli, B. Gutschwager, J. Hollandt, A. Diril, Ö. Pehlivan “EURAMET PROJECT TO EXAMINE UNDERLYING PARAMETERS IN RADIANCE TEMPERATURE SCALE REALISATION, 156 °C TO 1000 °C” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

J.V. Pearce, C.J. Elliott, G. Failleau, T. Deuzé, F. Bourson, M. Sadli, and G. Machin “PERFORMANCE OF PT-C, CR-C, AND RU-C FIXED POINTS FOR REFRACTORY THERMOCOUPLE CALIBRATIONS” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

C.J. Elliott, G. Failleau, T. Deuzé, M. Sadli, J.V. Pearce and G. Machin “LONG-TERM MONITORING OF THERMOCOUPLE STABILITY WITH MINIATURE FIXED-POINT CELLS“ presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, A. Todd and T. Wang “EVALUATION AND SELECTION OF HIGH-TEMPERATURE FIXED-POINT CELLS FOR THERMODYNAMIC TEMPERATURE ASSIGNMENT” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

M. Sadli, T. Bellin-Croyat, F. Bourson, T. Deuzé, A. Diril, G. Failleau, C. Journeau, D. Lowe, S. Mokdad, C. Parga, N. Richard « HIGH-TEMPERATURE FIXED POINTS FOR INDUSTRIAL APPLICATIONS” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

M. Sadli, K. Anhalt, F. Bourson, I. Grigoryeva, B. Khlevnoy, D. Lowe, G. Machin, T. Wang, Y. Yamada “ASSESSMENT OF THE LONG-TERM STABILITY OF HIGHTEMPERATURE FIXED POINT CELLS” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

S. Mokdad, G. Failleau, T. Deuzé, S. Briaudeau and M. Sadli ”A SELF-VALIDATION METHOD FOR HIGH-TEMPERATURE THERMOCOUPLES UNDER OXIDISING ATMOSPHERES” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

O.Kozlova, S. Briaudeau, L.Rongione, S.Guimier, S.Kosmalski, F.Bourson, M.Sadli “CALIBRATION OF RADIATION THERMOMETERS UP TO 3000 °C: EFFECTIVE EMISSIVITY OF THE SOURCE” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

S. Briaudeau, M. Ojanen, F. Bourson, M.Sadli, B. Rougié “THERMODYNAMIC TEMPERATURE OF THE COPPER FIXED POINT: EXPERIMENTAL VALIDATION OF THE UNCERTAINTY BUDGET” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

S.Mokdad, E. Georgin, Y.Hermier, F.Sparasci and M. Himbert ”VAPOR PRESSURE OF WATER IN THE RANGE FROM − 80 °C TO 45 °C” presented at 12th Symposium on Temperature and Thermal Measurements in Industry and Science, TEMPMEKO 2013, 14-18 Octobre 2013, Funchal, Madère, Portugal.

2012

Publications avec comité éditorial

Elliott C.J., Pearce J.V., Failleau G., Deuzé T., Briaudeau S., Sadli M., Machin G. "Fe-C eutectic fixed-point cells for contact thermometry: an investigation and comparison” Metrologia, 2012, 49, n°1, 88-94

K. D. Hill, A. Szmyrka-Grzebyk, L. Lipiński, Y. Hermier, L. Pitre, F. Sparasci, “CCT-K2.4: NRC/INTiBS/LNE-Cnam trilateral comparison of capsule-type standard platinum resistance thermometers from 13.8 K to 273.16 K”, Metrologia 49, 03005, 2012, DOI: 10.1088/0026-1394/49/1A/03005

S. Mokdad, E. Georgin, Y. Hermier, F. Sparasci, M. Himbert, “Development of a quasi-adiabatic calorimeter for the determination of the water vapor pressure curve”, Review of Scientific Instruments 83, 075114, 2012, DOI: 10.1063/1.4737627

Communications

F. Bourson, S. Briaudeau, B. Rougié, M. Sadli “Determination of the "furnace effect" of two high-temperature furnaces on metal-carbon eutectic points” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale).

G. Failleau, T. Deuzé, F. Bourson, S. Briaudeau, M. Sadli “A new technique for direct traceability of contact thermometry Co-C eutectic cells to the ITS-90” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale).

M. Sadli, G. Failleau, J. Pearce, D. del Campo, C. Elliott, S. Fourrez, M. de Podesta, C. Garcia “Metrofission: New High-Temperature References And Sensors For The Nuclear Industry” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale).

G. Machin, K. Anhalt, F. Edler, J. Pearce, M. Sadli, R. Strnad, E. Vuelban ”HITEMS: A project to solve high temperature measurement problems in industry” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf. orale).

G. Machin, K. Anhalt, P. Bloembergen, M. Sadli, Y. Yamada, E. Woolliams “Progress report for the CCT-WG5 high temperature fixed point research plan” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf. affichée).

Y. Yamada, K. Anhalt, M. Battuello, P. Bloembergen, B. Khlevnoy, G. Machin, M. Matveyev, M. Sadli, T. Wang “Construction of High-Temperature-Fixed-Point Cells for Assignment of Thermodynamic Temperatures” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf. orale)

K. Anhalt, R.D. Taubert, G. Machin, E. Woolliams, M. R. Dury, H. Yoon, M. Sadli, S. Briaudeau, B. Khlevnoy, M. Ballico, F. Jahan, A. Todd, D. Woods “A comparison of absolute radiometry by metal-carbon eutectic fixed-points” 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf. orale)

M. Laurie, S. Fourrez, M. A. Fütterer, J. M. Lapetit, M. Sadli, R. Morice, G. Failleau “Long Term Out-of-pile Thermocouple Tests in Conditions Representative for Nuclear Gas-cooled High Temperature Reactor Carburizing Atmospheres” in Proceedings of the HTR 2012, Tokyo, Japan, October 28 – November 1st, 2012 (conf. orale).

B. Rougié “Uncertainties in the ‘out of band’ effect for the thermodynamic temperature measurement” Workshop Uncertainties in Radiometric Temperature Measurements, INRIM, Turin 12 Octobre 2012.

M. Sadli “Context and introduction of the workshop on uncertainties in radiometric temperature measurements” Workshop Uncertainties in Radiometric Temperature Measurements, INRIM, Turin 12 Octobre 2012.

S. Briaudeau “Optical diffusion estimate in radiance measurements” Workshop Uncertainties in Radiometric Temperature Measurements, INRIM, Turin 12 Octobre 2012.

I. Didi-Alaoui, A. Vergé, D. Fiorillo, D. Jouin, F. Sparasci, Y. Hermier, “Design and implementation of a dedicated calorimeter for long-stem sprt calibrations at argon and oxygen triple points”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf. orale)

L. Pitre, F. Sparasci, D. Truong, A. Guillou, L. Risegari, P. A. Giuliano Albo, “Determination of the Boltzmann constant using a quasi-spherical acoustic resonator in helium gas”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale)

S.Mokdad, E Georgin, Y.Hermier, F.Sparasci, M. Himbert, “Development of a quasi-adiabatic calorimeter for the determination of the water vapour pressure curve”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale)

L. Risegari, F. Sparasci, L. Pitre, D. Truong, “Preliminary measurements on a 3He – 4He Vapor-Pressure Thermometer for Temperatures Between 0.65K and 5K”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (poster)

F. Sparasci, I. Didialaoui, A. Vergé, Y. Hermier, “A new calorimeter for the simultaneous calibration of sprts and csprts at the triple point of mercury”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (poster)

J. Fischer, B. Fellmuth, C. Gaiser, T. Zandt, L. Pitre, S. Briaudeau, F. Sparasci, D. Truong, Y. Hermier, et al, “The imeraplus joint research project for determinations of the boltzmann constant”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale)

F. Pavese, M. Fahr, Y. Hermier, …, F. Sparasci, et al., “Dependence of the triple point temperature of neon on isotopic composition and its implications for the ITS-90”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale)

A. Merlone, G. Lopardo, …, F. Sparasci, et al., “A new challenge for meteorological measurements: the “meteomet” project – metrology for meteorology”, 9th International Temperature Symposium, Anaheim California, 19-23 mars, 2012 (conf orale)

Date de mise à jour : 4 janvier 2018